CCI Single Source LED-EXP Exposure Unit - 25"x36"
CCI's Single-Source LED-EXP is designed for conventional or direct-to-screen exposures with extremely high detail. Unlike the traditional flat-bed or string LED units, our Single-Source LED-EXP was specifically designed for graphic printers that require high resolution and work with high line ruling (i.e. 85 line). The Single-Source LED-EXP will ensure even illumination over the exposure area in minimal time, giving the best results for a sharper stencil. This LED Exposure unit will also save in bulb usage and costs over metal-halide bulbs, which are costly and constantly need to be replaced. Unlike metal-halide bulbs, LEDs do not require a light integrator. LEDs do not waste power and money while they sit idle unlike metal-halide bulbs. This unit has the ability to cut energy use by *50%. (*based on a 1.1kW metal-halide). The LED-EXP’s PLC controlled touch screen gives you complete control. Presets can be used for every mesh count and coating used. CCI's Single-Source LED-EXP unit is Simple & Economical!
- Extremely Fast Exposure Times
- Over 1,400 Energy Efficient UV LEDs
- Touch Screen Display
- Infinite Amount Of Presets
- High Powered Vacuum Motor
- No Light Integrator Required
- PLC Controlled
- Table Top Design
- Fits Screens Up To 25" x 36"
- High Powered UV LEDs Optimized or Photopolymer and Diazo / Dual Cure Emulsions
This exposure unit uses a NEMA 5-15P plug. Please refer to the image below for reference.