Permaset Permatone Extender

Permatone is a water-based color-matching ink system from Colormaker. The Permatone matching system mixes over 950 Pantone colors.

Exhibiting the trademark soft handle and long lasting rub resistance of Permaset, Permatone inks provide pure vibrant color - with the control of a color-tone matching system.

Eco Credentials: Permatone has been granted certification by the Soil Association of the UK, having successfully met the requirements of the Global Organic Textiles Standards (GOTS) for non-organic chemical inputs for use in organic textile processing; Permatone is the only ink outside of the UK to receive such certification.

Permatone is ideal for printing on:| Light and Dark Toned Fabrics | Natural and Synthetic Materials |

Rub Resistance Level: Strong

Handle Level: Soft

Transparency Level: Semi-Opaque

Curing Instructions

Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, printed fabric should be cured for three minutes at 300-320°F. Airflow is crucial to remove steam outside of dryer chamber. If your conveyor dryer does not have forced air and proper ventilation, gates should be opened as high as possible to help allow steam from escaping, and ink to reach a full cure.

Storage and Clean Up

Keep containers tightly sealed, and store in a cool, well-ventilated area. Ink should be removed from screen as soon as printing is completed. Water based inks can typically be easily cleaned with just water. If ink is allowed to dry on screen or other surface, you can use one of our water based ink cleaners.