Home > Supplies > Chemicals > Emulsion Remover >

CCI EnviroStrip Emulsion Remover - Gallon

CCI EnviroStrip Emulsion Remover - Gallon


Quantity in Stock:25


Description Product Downloads

CCI EnviroStrip Emulsion Remover - Gallon

EnviroStrip is an all-natural iodine-based emulsion stripper. As a non-hazardous, drain safe chemical, EnviroStrip stands at the forefront of the environmentally friendly emulsion removers. With natural enzymes to help degrade emulsion, it quickly and economically removes all types of photo-polymer, diazo and capillary film emulsion and keeps mesh safe from damage.

Instructions for use

  1. Remove any ink residue, block-out or tape and flush the screen with water.
  2. Apply EnviroStrip by spray, brush or dip tank application.
  3. Use in concentrated form or dilute 1:10 with water for dip tank applications.
  4. Allow EnviroStrip sufficient time to penetrate the emulsion, approximately 30 seconds.
  5. High pressure water rinse the screen until all emulsion residue is gone.
  6. IMPORTANT: Do not allow EnviroStrip to dry on emulsion, as it will become permanent and impossible to reclaim!
  • Fast Acting
  • Non Toxic
  • Eco Friendly
  • Dilution up to 10:1 with water

Product Accessories
Scrub Brush Pad Only Spray Trigger for Quart Bottles


Scrub Brush Replacement Pad Replacement Trigger Sprayer

Rating: 1 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
REMOVER April 13, 2019
Reviewer: win from reno, NV United States  
This is pretty easy to use.  However if you "harden" your screens in the sun it is very difficult to remove.  I used the prochem lxp premixed green emulsion. IF YOU'RE GONNA USE THIS keep your screens away from the sun and you'll have no problems removing the emulsion.

Was this review helpful to you?