Vastex 18x24 RedFlash w/ HD Stand & Auto-Rotation
The Vastex RedFlash series of flash dryers are perfect for medium to large manual screen printing shops. Newly updated with digital controls, the digital percentage timer provides precise repeatability with adjustment from 0-100%. The new controls also cycle a 125 amp solid state relay which makes the whole unit run more reliably than ever. Their high wattage and close coil density heaters offer greater heater surface consistency than comparable flash dryers on the market. They also now come standard with The Vastex cooling fan and air curtain, which allows the flash to be set closer to the work which increases efficiency and productivity.
- 15 Year Heater Warranty
- 3,500 Watt 240V IR Heater
- On/Off Power Switch
- Diagnostic Pilot Lights and Heat Control
- Heavy Duty Side Handles and Locking Casters
- High Wattage and High Heater Density
- Easy Head Leveling Adjustments
- Cooling Fan and Air Curtains
- Heat Shields for Even Heater Temperature
- AutoFlash Rotator for Precise Flashing Times
The included AutoFlash upgrade rotates the head of the flash cure unit into place above the pallet with the touch of a foot pedal, and automatically rotates the head away from the pallet after a user-adjustable dwell time has elapsed to prevent burning or under-flashing of garments that occurs when operators become distracted.
Our AutoFlash units come estandard with an HMI (Human-Machine-Interface) to control and display dwell time and direction of head rotation. More visible from a distance than previous controls, it also displays a 'ready' message for the next cycle and improves cycle reaction by responding accurately whether the foot switch is pressed during or following a flash cure cycle.
The Auto Flash unit features a high-torque DC gear motor and eccentric arm drive that actuates head rotation progressively for smooth starts and stops, and a foot pedal switch with 7 ft (2 m) cord for operator convenience.
A "Breakaway Detent" feature stops the head from rotating if it encounters an obstacle, maximizing operator safety while minimizing damage to the flash cure head, the Auto-Flash gearbox and/or the screen printing press.
This flash dryer uses 2 separate plugs.
The heating element uses a NEMA 6-15P plug. Please refer to the image below for reference.
The AutoFlash rotator uses a NEMA 5-15P plug. Please refer to the image below for reference.