Permaset Aqua Standard Ink - Bright Red
The flagship ink from Colormaker, Permaset Aqua's Standard Color Range is a 100% solvent free, environmentally friendly formula that provides intense pigments rich in coverage with exceptional color yield. The resilient resin base is at once both soft and incredibly strong -- holding up beautifully to even the most severe rub and wash tests. See what all the fuss is about.
Permaset Aqua Standard Color is ideal for printing on: Light Fabrics | Natural and Synthetic Materials
Rub Resistance Level: Strong
Handle Level: Soft
Transparency Level: Semi-Opaque
Reductions With Print Paste
Permaset Aqua Standard inks are extremely high in pigment. Tints can be easily achieved by mixing Permaset Aqua inks with
Permaset Aqua Print Paste. Below are
reductions ranging from
100% Pure Permaset Aqua Ink, all the way down to just 0.1% Permaset Aqua to 99.9% Permaset Aqua Print Paste.
Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, printed fabric should be cured for three minutes at 300-320°F. Airflow is crucial to remove steam outside of dryer chamber. If your conveyor dryer does not have forced air and proper ventilation, gates should be opened as high as possible to help allow steam from escaping, and ink to reach a full cure.
Storage and Clean Up
Keep containers tightly sealed, and store in a cool, well-ventilated area. Ink should be removed from screen as soon as printing is completed. Water based inks can typically be easily cleaned with just water. If ink is allowed to dry on screen or other surface, you can use one of our
water based ink cleaners.