Home > Supplies > Inks & Additives > Water Based Ink > Standard Fabric Inks >

Permaset Aqua Standard Ink - Jet Black - 300ml
Permaset Aqua Standard Ink - Jet Black - 300ml


 
Alternate Views


Price:$12.99

Quantity in Stock:42

SKU: P000107
Qty:

Description Product Downloads
 

Permaset Aqua Standard Ink - Jet Black

The flagship ink from Colormaker, Permaset Aqua's Standard Color Range is a 100% solvent free, environmentally friendly formula that provides intense pigments rich in coverage with exceptional color yield. The resilient resin base is at once both soft and incredibly strong -- holding up beautifully to even the most severe rub and wash tests. See what all the fuss is about.

Permaset Aqua Standard Color is ideal for printing on: Light Fabrics | Natural and Synthetic Materials

Rub Resistance Level: Strong

Handle Level: Soft

Transparency Level: Semi-Opaque

Curing Instructions

Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, printed fabric should be cured for three minutes at 300-320°F. Airflow is crucial to remove steam outside of dryer chamber. If your conveyor dryer does not have forced air and proper ventilation, gates should be opened as high as possible to help allow steam from escaping, and ink to reach a full cure.

Storage and Clean Up

Keep containers tightly sealed, and store in a cool, well-ventilated area. Ink should be removed from screen as soon as printing is completed. Water based inks can typically be easily cleaned with just water. If ink is allowed to dry on screen or other surface, you can use one of our water based ink cleaners.

Reductions With Print Paste

Permaset Aqua Standard inks are extremely high in pigment. Tints can be easily achieved by mixing Permaset Aqua inks with Permaset Aqua Print Paste. Below are reductions ranging from 100% Pure Permaset Aqua Ink, all the way down to just 0.01% Permaset Aqua to 99.99% Permaset Aqua Print Paste.

Curing Instructions

Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, printed fabric should be cured for three minutes at 300-320°F. Airflow is crucial to remove steam outside of dryer chamber. If your conveyor dryer does not have forced air and proper ventilation, gates should be opened as high as possible to help allow steam from escaping, and ink to reach a full cure.

Storage and Clean Up

Keep containers tightly sealed, and store in a cool, well-ventilated area. Ink should be removed from screen as soon as printing is completed. Water based inks can typically be easily cleaned with just water. If ink is allowed to dry on screen or other surface, you can use one of our water based ink cleaners.


Product Accessories
Clear Ink Mixing Container - Pint Size OptiDrive Low Cure Catalyst for Water Based Inks - 2oz Permaset Aqua - Printing Retarder - 500ml Permaset Aqua Standard Ink - Print Paste (Extender) - 300ml
Price:$2.99

Add
Price:$15.00

Add
Price:$22.99

Add
Price:$9.99

Add
Clear Ink Mixing Container - Pint OptiDrive Low Cure Catalyst for Water Based Inks - 2oz Permaset Aqua - Printing Retarder - 500ml Permaset Aqua Standard Ink - Print Paste (Extender) - 300ml

Rating: Rating: 5 of 5 5 of 5 Total Reviews: 12 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 October 11, 2020
Reviewer: michael bentson from SAN JOSE, CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Textile Ink September 27, 2019
Reviewer: Wesley Roberts from APO, AP United States  
Great customer service and quick delivery! Would order from them again!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product June 27, 2019
Reviewer: Alan Thomas from Parma heights, oh  
This is really jet black and not some run of the mill black and it's easy to print

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 April 19, 2019
Reviewer: Christopher Sammons from Ann Arbor, MI United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 April 6, 2019
Reviewer: KRISTA SISON from LOS ANGELES, CA United States  


Was this review helpful to you?

View All Customer Reviews