Home > Supplies > Inks & Additives > Water Based Ink > Standard Fabric Inks >

Permaset Aqua Standard Ink - Glow Magenta - 300ml
Permaset Aqua Standard Ink - Glow Magenta - 300ml


 
Alternate Views


Price:$19.99

Quantity in Stock:6

SKU: P005807
Qty:

Description Product Downloads
 

Permaset Aqua Standard Ink - Glow Magenta

The flagship ink from Colormaker, Permaset Aqua's Standard Color Range is a 100% solvent free, environmentally friendly formula that provides intense pigments rich in coverage with exceptional color yield. The resilient resin base is at once both soft and incredibly strong -- holding up beautifully to even the most severe rub and wash tests. See what all the fuss is about.

Permaset Aqua Standard Color is ideal for printing on:| Light Fabrics | Natural and Synthetic Materials |

Rub Resistance Level: Strong

Handle Level: Soft

Transparency Level: Semi-Opaque

GLOW COLORS - **IMPORTANT** - Glow only refers to a bright color tone, Glow colors do not 'glow in the dark'.

Curing Instructions

Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, printed fabric should be cured for three minutes at 300-320°F. Airflow is crucial to remove steam outside of dryer chamber. If your conveyor dryer does not have forced air and proper ventilation, gates should be opened as high as possible to help allow steam from escaping, and ink to reach a full cure.

Storage and Clean Up

Keep containers tightly sealed, and store in a cool, well-ventilated area. Ink should be removed from screen as soon as printing is completed. Water based inks can typically be easily cleaned with just water. If ink is allowed to dry on screen or other surface, you can use one of our water based ink cleaners.


Product Accessories
Permaset Aqua - Printing Retarder - 500ml Clear Ink Mixing Container - Pint Size Permaset Aqua Standard Ink - Print Paste (Extender) - 300ml OptiDrive Low Cure Catalyst for Water Based Inks - 2oz
Price:$22.99

Add
Price:$1.99

Add
Price:$9.99

Add
Price:$19.99

Add
Permaset Aqua - Printing Retarder - 500ml Clear Ink Mixing Container - Pint Permaset Aqua Standard Ink - Print Paste (Extender) - 300ml OptiDrive Low Cure Catalyst for Water Based Inks - 2oz

Rating: Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 October 25, 2018
Reviewer: Danielle D from PHILADELPHIA, PA United States  


Was this review helpful to you?